Assorted Fallout Vehicles- 28mm (WIP)

prusaprinters

<p>Welcome wastelander to my humble collection of Fallout vehicles!</p> <p>All of these models are scaled to approximately 1:50 (28mm) for skirmish games; they should fit well AS IS for Fallout Wasteland Warfare, or adjust them as you see fit.</p> <p>SCALING NOTE: If you are intending to print these to match the commercially available Corvega and Coupe models and stl files from Modiphius, you should adjust the scale to 98%. The Modiphius Corvega is @50mm wide and 139mm long.</p> <p>If the file is here, that means I have printed it successfully on my SL1.... IN RESIN! These are NOT recommended for FDM... save your filament for something else.</p> <p>Current models include:</p> <ul> <li>Chryslus Corvega: Sedan</li> <li>Chryslus Corvega: Police Interceptor</li> <li>Fusion Flea: Closed Canopy</li> <li>Fusion Flea: Open Canopy</li> <li>Rocket 69: Open Top</li> <li>Rocket 69: Closed Top</li> <li>Pick-R-Up</li> <li>Taxi Cab: Intact</li> <li>Taxi Cab: Damaged</li> <li>Vault-Tec Van: Intact</li> <li>Vault-Tec Van: Exploded</li> </ul> <p>02-12-2020 Update</p> <ul> <li>Street Cleaner added</li> <li>Resized Taxi Cabs... seemed too large compared to the Corvega</li> </ul> <p>02-17-2020 Update</p> <ul> <li>Station Wagon added</li> <li>Station Wagon: no roof added</li> <li>Taxi Cab v2 added. Completely reworked the original, made wider and fixed the wheels, and bashed on some additional assets to make it more Fallout looking. </li> </ul> <p>All of these files are remixes of stl files from various other sources too numerous to cite or even recall for that matter. They have been scaled appropriately, repaired in Meshmixer and ran through Makeprintable; they are manifold and ready for hollowing.</p> <p>Some files were rather "low poly" to begin with, and I have done my best to fix them as much as possible.</p> <p>Painted Examples can be on my (shameless plug) Facebook Page: <a href="https://www.facebook.com/DiabolicalTerrain">https://www.facebook.com/DiabolicalTerrain</a></p> <h3>Print instructions</h3><p>All of these models have been printed successfully on my SL1; they are not test prints, game renders, assets, etc. They will need to be hollowed in Meshmixer with 2mm walls and a pair of 2.5mm drain holes.</p>