Assassin's Creed Hidden Blade

thingiverse

This is a collection of printing settings for a variety of parts used in 3D printing, presumably for the Creality CR-10 or similar machines based on the details given: **Key Settings and Repetitions** * **Layer Height**: The height of each printed layer across all parts: 0.1mm * **Shell Thickness**: Thickness of the part's outer layers to maintain structural integrity: 0.8mm * **Fill Density**: Sets how dense or hollow parts are, where higher settings use more filament but create a stronger print: 100% * **Print Speed**: Speed at which each part is printed: 80mm/s * **Printing Temp** and **Bed Temp**: Temperature for both the hotend and bed when printing all these parts: 230 C and 110 C, respectively. * **Supports**: Some parts need support to print accurately; others don't due to design or print orientation. **Identical Printing Settings Across Parts** Most settings are identical across all printed parts: * All prints use a **raft** for platform stability before printing starts. A raft is essentially a thick layer of the material on which you lay your part. * The size of the filament used: 1.75mm, suggesting the use of common and relatively small-diameter 3D printing spools or filaments. * **Nozzle Size**: All prints have a nozzle diameter of 0.4mm, which impacts both layer thickness and precision in details. **Specialized Settings for Some Parts** A couple of parts have unique settings: * **GEAR BASE** and **GEAR COVER ASSASSINS & TEMPLARS**: These require support to print well because their designs would not print correctly without some extra structural support. Given that almost all the printing settings are identical, you might simplify the information for easier use by excluding repeating data on each section: - Common settings include: - Layer Height: 0.1mm - Shell Thickness: 0.8mm - Fill Density: 100% - Print Speed: 80mm/s - Printing Temp: 230 C - Bed Temp: 110 C - Platform: Raft - For the parts needing extra support due to design complexity or vertical printing orientation: - GEAR BASE - Supports needed with a 35% support grid. - GEAR COVER ASSASSINS & TEMPLARS - Supports are required with a 35% support grid. All others can follow the common settings above for quick and identical results.