Ashtray hidden tablet stand. Toyota corolla 2005

thingiverse

https://www.youtube.com/watch?v=k_zTgN8aXaI I designed this specifically for my Toyota Corolla 2005. Tested with a Samsung Galaxy Tab A. Should work with many other tablets too. My Galaxy Tab A with a silicone cover and glass screen protector is light pressure fitted, so it doesn't slide out easily. Recommended print settings: Printed in ABS, maybe it works for PLA as well. Not entirely sure. Mirror each piece in your slicer, print in the same orientation as shown in the video for best results. I recommend a brim, heated bed 100C nozzle 235C - or whatever your filament prints best with. Along with kapton tape and ABS juice. Works perfectly for me so far. Install instructions: The file named "Tablet Holder - Holder" should be fused together by applying acetone to the surface that made contact with the buildplate during printing, then press the two pieces together with your hands, while also pressing it up against a table that isn't bumpy. This will make sure the two pieces align properly. After a minute or two doing this you can release the two pieces and let the acetone dry and fuse the two pieces together. For final application apply "No more nails 120kg double sided tape" or similar, to the two pieces named "Skinne". You should be able to make out how I applied it from one of the pictures. Then make sure it is inserted and applied correctly into the ashtray, it shouldn't be too high, or else the tray won't close properly. You'll know what I mean. Also take note that the tray may open during a bit of acceleration when driving, simple fix is add a tiny piece of "no more nails" to the ashtray piece that prevents the tray from falling out. You can see the tiny piece in the video just as I open the tray, it's red.