Artillery Sidewinder X1 v4 Cooling Rig w/ BLTouch & 4020 fans

thingiverse

As many I wasnt too happy with the cooling performance of the standard Sidewinder X1. Also it bothered me, that you could not see the nozzle while printing. So, I attempted to find a solution. After I saw Just-Printed3D's version (https://www.thingiverse.com/thing:4799645) I built upon that. (Due to his chosen licence I could not include the flat cable holder. Just get it from his release). During tests I found, that I had cooling issues on the far side of the nozzle fan. So I added another 4020 fan in the front with a fan duct exactly on the other side. I oriented both fan ducts, so that the nozzle stays visible from the front. Also included is the BLTouch v3.1 mount from the famous Waggster mod. The offset is his standard X28/Y-33. All parts can (and should) be printed without supports. I printed mine in PLA and it works fine so far, though I guess something more heat resistant would be better for the nozzles. I used Ruthex M3 threaded brass inserts for assembly. If you dont have any or dont want to use those, you might need to change the holes. I've included the STEP file. You'll also need some M3 screws and a single M3 nut for the BLTouch mount. Another important note, I used the incredibly detailed Sidewinder X1 model by Rick and Morty from grabcad (https://grabcad.com/library/artillery-sidewinder-x1-1). Unfortunately I found, that the X1 v4 is slightly different from the v1 model. Apparently the Extruder holding plate thingy has been changed slightly. The nozzle now has another offset. I included the modified print head in the STEP file.