Artillery Sidewinder X1 - Double spool holder

prusaprinters

<p>Hi friends,</p> <p>I don't know about you but for me I find that my Artillery Sidewinder X1 spool holder is not easy at all. I first used the Skinah spool holder <a href="https://www.thingiverse.com/thing:3850399">https://www.thingiverse.com/thing:3850399</a>) which is very well designed.</p> <p>But IMHO, a filament guide was missing. So I designed mine. And I added support to install the end filament detector. It was a very good idea to design it removable because I realized later that the Sidewinder X1 detector was not compatible with my octoprint :(</p> <p>But anyway. It might be useful to someone else.</p> <p>After that, I tried two-color printing and found it was a good idea to have coils side by side to change quickly and easily. So I reused and extended the Skinah roll to allow one (in the center or on the side) or two coils.</p> <p>And I adapted my filament guide for that.</p> <p>This is what you see here.</p> <p>Everything is printed without support. I fill 20% for the filament guide and the detector and 50% for the rollers.</p> <p>I reused the original m3 to screw the filament detector and 2 m3x8 for the filament guide.</p> <p>I hope this will help you.</p> <p>Bonjour chez vous.</p> <p>+++++</p> <p>Dont forget to visit my Artillery printers dedicated website : <a href="https://docarti.fr/">https://docarti.fr/</a></p> <h3>Print Settings</h3> <p><strong>Printer:</strong></p> <p>Artillery</p> <p class="detail-setting rafts"><strong>Rafts: </strong> <div><p>No</p></div> <p><strong>Supports:</strong></p> <p>No</p> <p class="detail-setting infill"><strong>Infill: </strong> <div><p>20% and 50%</p></div> </p></p> Category: 3D Printer Accessories