Arrma Infraction 3s TPU drift tires
thingiverse
Drift tire for Arrma Infraction 3s Wall line count: 8 with 0,4mm nozzle. Top Layers: 6 Bottom Layers: 6 Infill: 70% - pretty hard tire. Probably less better. Material: TPU Brim: 30 lines Print speed: 150mm/s on Kobra 2, just under 4 hours Use stock rims. Loose old tires from rim by heating in oven at 145 deg C for 30 minutes. Press the printed TPU on rim with a clamp. Insert a screw driver between tire and rim. Use clamp next to it and work around. Fasten tires to rim with one or two drops glue in two places. Sits pretty tight anyway. I pulled the tire a bit by putting it on a vice on the side and the opening the vice to stretch it. Helps when putting tire on rim. Best driven on area 30x50m. Is not a drift tire for a very small area.
With this file you will be able to print Arrma Infraction 3s TPU drift tires with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Arrma Infraction 3s TPU drift tires.