Armillary phone Holder

cults3d

Here is the armillary Mount for smartphone. Ideal to keep your phone for a pleasant use. For phones with a maximum height of 162.5 mm and a drop of 78.5 mm, this mount is perfect. It supports iPhone SE, 6s, 6s+, 7, 7+, 8, 8+ and X models, as well as Samsung Galaxy S7, A8, S8, Note 7 and 8 phones. Huawei P20, P2 pro, P20 lite, Mate 10 pro, Y5, Y6, and Y7 devices also fit perfectly in this mount. Designed to be placed on a desk, this stand features a hole for a Kodak-type screw (UNC 1/4", 20 tpi) and is designed for comfortable use. Each piece of the armillary Mount is carefully crafted for a precise 3D impression. We recommend using a layer height of 0.2 mm to maintain good accuracy when printing this mount. The parts required for assembly are: * Base: 1 part * Exterior Gear: 1 part * Interior Gear: 1 part * Shaft Roller: 4 parts * Exterior Roller: 2 parts * Interior Roller: 2 parts * Pinion: 4 parts * Shaft Pinion: 2 parts * Shaft Scroll: 2 shares * Interior Bar: 1 part * Interior Slide: 2 parts * Exterior Bar: 1 part * Exterior Slide: 2 parts * Rod: 2 parts * Claw: 1 share * Claw Button: 1 part The inter-piece adjustments are carefully calculated to ensure smooth functions at each assembly. Detailed instructions for assembly can be found below, which include sanding (grain 200 and 400) to obtain the desired finish. Base: * The diameters of 12 mm receiving the shafts of the pinions must allow free rotation of the shaft. * They are drawn at a diameter of 12.1 mm for a shaft at 11.9 mm. * The 10 mm diameters receiving the shafts of the rollers must be tightened as they stiffen the base. They are drawn at 10.05 mm for a 10 mm shaft. The hole in the base has a UNC thread 1/4" 20 tpi (Kodak screw) for mounting on a camera tripod. Pinion: * The diameter is drawn at 12 mm to tighten slightly on the shaft, ensuring the drive by the key. Rollerblades: * They handle the game of gears. Those labeled outside go down the base and inside at the top. * Their inside diameter is drawn at 10.2 mm to rotate freely on the shaft diameter 10 mm. Bars: * The diameter of the ends must rotate effortlessly on the gears. It is 7.9 mm for a diameter of 8 mm on the gears. * The center diameter measures 7 mm for one and 7.3 mm for the other, ensuring completely free movement. Slides: * The inner square measures 8.3 mm on one side and slides freely on the bars whose square section measures 7.9 mm. * Two of the slides receive a connecting rod on the diameter 12 mm. Rods: * Their hole diameter 12.2 mm splits rise on the diameter 12 of the slide. Claws: * The 5.1 x 15.5 mm rectangular slot fits on the 5 x 15 mm rectangle of the connecting rod. The website for more information is https://www.3d-fabric-jean-pierre.com