Armattan 4" Japalura Micro Camera Adapter

prusaprinters

<p>Simple adapter to allow the use of micro cameras in the 4" Armattan Japalura frame. I've included the STL and the Fusion360 file if you want to tweak it for your use. The length will just barely keep the camera behind the roll cage so it should be well protected.</p> <p>You will need:<br/> (2) M3x8 or longer screws to mount the adapter to the frame<br/> (2) M3 nuts or locnuts to pair with the M3 screws<br/> (2) screws to mount your camera, I believe these are M2 but I didn't measure them since they came with the camera.</p> <p>In my application it is for the Foxeer Falkor 2 Micro camera.</p> <h3> Print Settings</h3> <p><strong>Printer Brand:</strong></p> <p>Monoprice</p> <p><p class="detail-setting printer"><strong>Printer: </strong> <div><p>Maker Select Plus</p></div><strong>Rafts:</strong></p> <p>No</p> <p><p class="detail-setting supports"><strong>Supports: </strong> <div><p>Doesn't Matter</p></div><strong>Resolution:</strong></p> <p>0.2mm</p> <p><p class="detail-setting infill"><strong>Infill: </strong> <div><p>35%</p></div><br/> <strong>Filament:</strong><br/> Any PLA+ Any <br/> <p class="detail-setting notes"><strong>Notes: </strong> </p><div><p>I used PLA+ from ESUN but any material that you can reliably print will be fine. </p> Print the part with the flat side down, hex opening facing up.</div></p> <p>You can use supports but no matter the resolution it will only be 2 strands under the hole for the camera mounting screw. I used them but if you have decent bridging, you probably won't need to.</p> <p>You will need to print 2 copies to get your left and right mounts. These are identical and DO NOT need to be mirrored in any way.</p> </p></p></p> Category: R/C Vehicles