Arknights - Reed Spear

cults3d

This model is designed for reed cosplay from Arknights. It is a huge spear and it is NOT an easy model to print. It is cut into 15 pieces for the spearhead and 4 pieces for the pummel to fit in a printer with 200mm x 200mm x 200mm printing platform. For this model, I do not slice it further into half for a bigger faces that can lay on the printing bed as there will be too much pieces as it may cause confusion during assemble process. For pieces name and assembly, you can refer to the picture in the preview section labelled with the pieces' name respectively. There is a uncut version included as well just in case you want to cut it yourself. It is NOT an easy print and not post process friendly as there will be quite a number of support needed. So think twice before you make it. As usual, print all the pieces and glue them together using super glue or PLA glue. If you wish to further enhance the bonding, you can use heating rod to melt the part between the connection. You can find some tutorial on Youtube for PLA welding. There is a tunnel punch through the model for bone installation too. It is 10mm in diameter. You can use steel rod or other suitable type of material as bone. I will suggest it to be between 7mm - 10mm in diameter. There is a file name "peg" included to help you align the pieces just in case you need it. It is a cylinder with 9.5mm diameter. This is optional to print. It can be use on the pieces with tunnel that past through. For scaling please use the same scale factor for all the pieces. Cheers and Happy Printing!