ARFUN Pro 95mm Frame Replacement

thingiverse

Replacement Frame for Arfun Pro 95mm. I broke the carbon fiber frame very easily and needed a replacement immediately, so I hit a tree branch. This replacement frame is identical to the original but with thicker arms, and I notice no difference in performance. The PIDs do not need to be changed; simply hot glue the camera and beeper to the new frame. I am releasing an updated version that has a camera mount at different angles and features a beeper mount on the back. You can reuse the carbon top plate from the drone. If you want a top plate design, comment below and I will include it with the v2 frame. I hit a mud pit with my dirty drone and it needs a bath! UPDATE 11/5/18: I have added the v2 frame to this replacement part, which has the same idea as before but with a smaller piece of carbon for the camera. I plan to test its durability; if it breaks after a few flights, I will make a v3 that consists of three parts: Frame, Camera Mount, LED Mount. UPDATE 12/28/18: I received some XT30 connectors as a Christmas gift and installed them on my drone. This upgrade makes the drone feel much faster and more powerful. However, the thicker gauge wire is unable to go around the LED/Buzzer mount that was added in v2. Therefore, I have removed this mount from the "ARFUN v2 XT30.stl" file. To mount your LED/Buzzer board, you must either hot glue or use other means to attach it to the carbon fiber top plate. Make sure to check that the props do not hit the board. UPDATE 6/9/19: I made camera zip-tie holes larger for improved performance. NOTE: You may have to drill out some plastic from the Flight Controller mounting holes, as the screws will barely fit. I will fix this issue in the upcoming v2 frame.