Arduino Uno Rev3 with Ethernet Shield case
thingiverse
This design is specifically engineered for use with an Arduino Uno Rev3 and Ethernet shield, requiring 40mm M3 screws. However, only three screws can be used due to a lack of space between the pin slot and screw hole to accommodate countersinking.\nPrint Settings\nPrinter: Geeetech i3 Pro B\nRafts: No\nSupports: Yes\nResolution: 0.2\nInfill: 20\nNotes: The model was printed using a 0.3 nozzle, with First Layer Height set at 0.3 and Layer Height at 0.2.\nLayer Width: 0.51\nPerimeters: 3\nSlicer: Slic3r 1.33.8 prusa3d (https://github.com/prusa3d/Slic3r)\nIt is advisable to use Slic3r version 1.33.8 or higher if you are using this slicer, as earlier versions like 1.2.9 produce inconvenient support structures.\nMore about supports: Removing the supports from screw and nut holes can be challenging; setting the interface layer to 1 makes it easier. I have tried rectilinear and pillars support without noticeable difference; your suggestions are welcome.
With this file you will be able to print Arduino Uno Rev3 with Ethernet Shield case with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Arduino Uno Rev3 with Ethernet Shield case.