Arduino Uno + Ethernet

thingiverse

This customized design is based on http://www.thingiverse.com/thing:202525 and was created using the Customizer! (http://www.thingiverse.com/apps/customizer/run?thing_id=202525). Key specifications include a 14mm height for the power plug hole, a gap of 0.6mm, no front hole width, and side walls and bottom thickness of 1.6mm. The custom label is "Steppers," with a back hole height of 5mm and standoff height of 7mm. An Arduino Type 0 is used, with back hole position at 20mm, no front hole width 2, a custom height of 20mm, 13mm height for the USB plug hole, zero front hole height, and zero front hole height 2. The clearance between the Arduino and sidewalls is set at 1.5mm, with standoff thickness at 1.6mm, standoff hole diameter of 2.9mm, back hole width of 30mm, and a 16mm height for the Ethernet plug hole. Shields 1, 2, and 3 are set to 2, 0, and 0, respectively.