Arduino Sensor Shield V5.0 Case

thingiverse

This case is designed for safeguarding the Arduino + Sensor Shield V5.0. To build this project, you will need a M3 pipe tap and the following screws: 1. Three M3 x 5mm screws for mounting the Arduino boards 2. Four M3 x 25mm screws 3. Eight M3 Hex Nuts (four are optional) First, secure the Arduino board to the case using three M3x5mm screws and hex nuts from underneath before attaching the sensor shield. You can assemble the upper cover and lower base without hex nuts by just using the M3 threads, but adding four hex nuts on the underside will provide extra strength. To print a reset button, you must slow down your print speed and use the fastest cooling fan when printing a cylinder with a diameter of 3.8mm.