Arduino filastruder filiment guide with servo mount

thingiverse

Human adjusted the mechanism to accommodate a tower pro SG90 mini servo, requiring approximately 0.5 mm of filling material due to its narrow width. They employed an Arduino sketch to operate the servo at a slow pace. To access this functionality, users should download the VarSpeedServo library from https://github.com/netlabtoolkit/VarSpeedServo. When connecting the device, users need to connect it as follows: 5v to power Ground for grounding Signal Pin 9 (typically the orange wire) To utilize the library and the associated Arduino sketch, ensure you download and install the VarSpeedServo library from the provided link. Without this addition, the library will not function. Here's a simplified servo sweep script: #include // Servo library declaration VarSpeedServo MyServo; int servoSpeeds = 1; // Sweep speed ranging from 1 (slowest) to 255 (fastest) int servoMinPosition = 0; // Minimum servo angle int servoMaxPosition = 100; // Maximum servo angle void setup() { MyServo.attach(9); // Attaches the signal wire to pin 9 MyServo.slowmove(servoMinPosition, servoSpeeds); // Begins sweeping from minimum position at set speed } void loop() { if (MyServo.read() == servoMinPosition) { MyServo.slowmove(servoMaxPosition, servoSpeeds); } else if (MyServo.read() == servoMaxPosition) { MyServo.slowmove(servoMinPosition, servoSpeeds); } }