Arduino_case

thingiverse

This is a project that requires an Arduino Mega. This piece can be used with another of my designs (Adapter) as seen in the pictures. Links: Arduino: https://www.amazon.ca/Carte-ATMEGA2560-ATMEGA16U2-Cable-Arduino/dp/B07LD6KV55/ref=sr_1_16?__mk_ca=%C5E3%96%9B%C5%B8%81&qid=1564370322&s=gateway&sr=8-16 Adapter (1): https://www.thingiverse.com/thing:3776710 Terminal Block (6): https://www.amazon.ca/100-pcs-Pole-Mount-bornier-300/dp/B07D71JNQD/ref=sr_1_14?__mk_ca=%C5E3%96%9B%C5%B8%81&qid=1564367569&s=gateway&sr=8-14 To assemble the case, you will need 4 screws M5 with nuts. Simply encase the adapter at the back of the case and screw it into place. Next, make wires that can be plugged into the board and welded to the terminal block. Place terminals blocks in the holes at the top and bottom of the case, then weld the wires to the terminals blocks. Fix the board in the case with M3 screws and plug the wires into the board. Put the cover on the case, and you will have a nice Arduino case. Note: I am not responsible for any problems that may arise from this product. Make sure you assemble it correctly before using it. A bad assembly can cause a fire. Enjoy!