Arducam UC-684 Camera Mount for Voron Printers

prusaprinters

This is a mount for the Arducam IMX291. I purchased the camera from Amazon here. The parts consist of a back cover, front cover, and a mount. 2 mounts are included. One mounts in the corner of two 2020 extrusions and one mount is for mounting flat against a 2020 extrusion. It was designed and works with the camera linked here. YMMV on other cameras.The cover takes 4 M3 heatset inserts. The mount takes one M3 heatset insert. Use 4 M3 x 6mm SHCS for the covers, 1 M3 x 14 SHCS for the mount pivot, and 2 M3 x 8mm SHCS for mounting the mount to the extrusion using M3 t-nuts.BOM:5 - M3 Threaded Inserts (M3x5x4)4 - 6mm M3 SHCS2 - 8mm M3 SHCS1 - 14mm M3 SHCS2 - M3 T-nutsThe models print without generated supports. Print the front cover with the front face down on the bed. The rear cover has built-in supports that should break away easily. It should be printed with the inside part of the cover down on the bed. The mounts should print with their flat side on the bed.