Arducam Camera Housing and Mount for Original Prusa Enclosure

prusaprinters

Arducam 8MP USB camera module housing and mount compatible with HeyVye's Modular Mounting system. I have included a stub arm for use with the Original Prusa Enclosure, or any other enclosure that can use a M3 through bolt. The Arm Axis Changer is needed from the Modular Mounting system to angle the camera in 2 directions.The Arducam used was purchased on amazon here: https://www.amazon.com/dp/B0C3L8S68N?ref=ppx_yo2ov_dt_b_product_details&th=1It uses a 115° wide angle M12 lens, that must be removed temporarily to fit in the housing. The exterior border of the PCB must be trimmed/removed permanently. The back panel connects to the front with (4) M2.5x8 or M2.5x10 bolts.  The back panel and PCB can be oriented sideways in the front housing if a vertical aspect ratio is desired.  I use a 3:4 aspect ratio at 1200x1600 vertically to capture the entire build volume.  Modifications to octoprint settings were required to increase the resolution.Print SettingsPrinter Brand:PrusaPrinter: I3 MK3SSupports:YesResolution: .1mmInfill:15Filament: Overture PETG Black  Category: Camera