Arc Reactor Fidget Spinner

thingiverse

Ironman Arc Reactor Fidget Spinner. It is designed to work with a 26mm outer diameter and a 10mm inner diameter bearing, but I had only those lying around, so that's what I used. If you're interested in one that fits a standard size bearing, just leave a comment - if there's enough interest, I'll make one. Building Instructions: Parts List: - 26mm OD and 10mm ID bearing - 20mm long M3 bolt x1 - Copper wire and 36 resistors are optional - they're just for show. - 3D printed parts You will need to print: - Base x1 - Bearing spacer x1 - Top & bottom x2 - Coil x10 Assembly Instructions: Glue the coils onto the base, then push the bearing spacer into the bearing and clip it in. The M3 bolt helps align the top and bottom with the centre of the bearing spacer - after gluing them on, you can remove the bolt. Once done, add wire to the coils and resistors or any other parts you like. If you have questions or ideas on how to improve this project, just comment below or send me a message!