Arbol hueco 01

thingiverse

This Customized Tree was created using the Thingiverse Customizer tool. The original "customizable_tree..." file, generated by the Customizer, was too small in size to be printed on its own with my printer. I needed a larger version, which couldn't be printed in one piece. Therefore, I enlarged the tree 2.4 times in size and divided it into 20 separate parts for printing. These parts have been glued together using acetone, since they were printed in ABS plastic, reinforced with cyanocrylate adhesive. The hollow tree was printed using a nozzle diameter of 0.4mm and layer height of 0.4mm, with a wall thickness of three layers. Possibly four layers would have been better for getting more surface area contact on the inclined branches, as some have turned out to be a bit weak. Instructions: The following parameters were used in the Customizer: tip_max_ratio = 70 branches_keep_growing = 0 branch_twist_angle = 90 branch_cross_section_shape = 6 use_advanced_settings = 0 root_min_ratio = 50 root_max_ratio = 60 allowed_overhang_angle = 45 max_number_of_branches_from_each_branch = 3 custom_shape = [[[0, 46.278908], [-15.319993, 17.365068], [-47.552826, 11.729756], [-24.788267, -11.775289], [-29.389259, -44.171944], [0, -29.785017], [29.389269, -44.171940], [24.788267, -11.775290], [47.552826, 11.729764], [15.319985, 17.365074]], [[0, 1, 2, 3, 4, 5, 6, 7, 8, 9]]] trunk_radius = 20 seed = 0 allow_all_overhangs = 1 trunk_length = 30 stop_budding_position = 60 length_min_ratio = 70 min_number_of_branches_from_each_branch = 2 min_branching_angle = 40 maximum_branching_iterations = 7 base_shape = 32 start_budding_position = 50 max_branching_angle = 55 tip_min_ratio = 50 branch_diameter_cutoff = 1.6 length_max_ratio = 100