AR15/M4 Ambidextrous Magazine Release - AR15/M4 Ambidextrous Magazine Release

cults3d

AR15/M4 ambidextrous magazine ejector Consists of 3 parts: Knob, retention bolt and arm. You will need: -X1 M3x35mm screw and nut -X1 M3x10 screw (headless is best) Use original magazine ejector spring Mandatory drilling on retention bolt : Diam 2.5mm for pivot point + tap M3 Diam 3mm in the rod Mandatory marking on key -Diam 3mm on pivot point Assemble the nut in the knob, assemble the M3x35 screw in the retention bolt, install the assembly on the replica. Install the arm on the retaining bolt and assemble using the M3x10 screw. Use a very stiff and hard material, I've had good results with PETG carbon fiber and PC/ABS Magazine Release AR15/M4 ambidextrous Consists of 3 parts: Knob, Retainer and Arm. You will need : -X1 M3x35mm screw and nut -X1 M3x10 screw (headless is best) Use the original spring from the magazine ejector Mandatory drilling on the retainer : Diam 2.5mm for the pivot point + thread M3 Diam 3mm in the rod Mandatory marking on the key -Diam 3mm on the pivot point Assemble the nut in the knob, assemble the M3x35 screw in the retainer, install the assembly on the replica. Install the arm on the retainer and assemble with the M3x10 screw Use a very stiff and hard material, I have had good results with PETG carbon fibre and PC/ABS Translated with www.DeepL.com/Translator (free version)