AR-15 service vise for rifles

cults3d

Service vise for AR-15 rifles and other suitable compatible weapons. Facilitates cleaning and assembly of accessories. Rifle can be mounted in many different ways, see photos. Tested with Aero Precision 10.5" rifle, tactical flashlight and Vortex Crossfire collimator. REUPLOAD: added two versions of the magazine well mount, with the ability to tighten for better fixation. Includes a version that bolts to the base and a version that can be clamped in a bench vise. Materials needed: -3 pieces of M8x50 screws -5 M8 hex nuts -3 pieces of M4x8 nuts with Allen head -rubber from crushed tyres -self-drilling wood screws (length depends on the strength and material to which the vise will be screwed). Reupload: -1 piece of M6x100 hex head screw -2 pieces of M6 hex nuts SECURE THE SCREW IN THE PLASTIC NUT WITH INSTANT GLUE AFTER INSERTION Screw the M4 screws into the plastic with force, do not overtighten, the joints must turn freely! Use an Allen wrench to screw the vice onto the M8 screws, while holding the plastic nuts on the screw heads. !!!DO NOT USE LONGER M4 SCREWS, THE LENGTH IS OPTIMIZED FOR A COUNTERSUNK SCREW, IF YOU USE A LONGER SCREW AND ITS OVERLAP FROM THE PLASTIC PART, THE FOREARM OR OTHER PART OF THE WEAPON WILL BE DAMAGED WHEN TIGHTENING THE CLAMPS!!!! Push all nuts into the plastic parts, optimally sealed. Trim the rubber parts to size and glue them together with a good quality instant glue. If you encounter a problem with the model, please send me a message.