Apple Watch Stand - Series 5, 44 mm

thingiverse

This is a full, from scratch redesign of the [popular stand by @MrCrankyface from 2016](https://www.thingiverse.com/thing:1393132). My design goals were as follows: * Perfect fit for the __Apple Watch Series 5__ and its charger (⌀ 27.5mm) * Fine STL resolution for a really smooth and high-quality print * As small as possible * No sharp corners or tight cable bends * Easy to remove/replace the cable if necessary * High-weight for a solid, robust feel and stable placement on the nightstand Since PLA only has a density of 1.24g/cm3 the stand would only weigh about 50 grams at 100% infill, which is too little for a heavy feel and proper stability. Therefore the model allows for seven 12.7mm (1/2") steels balls to be inserted on its underside. At 8,4g apiece the balls add almost 60g of weight at the base and bring the total up to more than 80g. (The print itself will weight about 23g at 15% infill.) These balls are standard bearing balls, not hard to come by and well suited as added weight in many of your print designs. I got 500 of them for 13 cents apiece a few years back, which will last me for quite some time to come. Of course you can also use the stand without the balls, if the weight-issues is not important to you. Original Design CAD Document for your forking/modding pleasure: https://cad.onshape.com/documents/3dd21fe61c6c6b3d671f3255/w/aa1deec7129b46d7ff942417/e/4145d96e96180529506738bd