Apple Watch Charging Stand

prusaprinters

<p>I small print to give my Apple Watch (44mm) a better home on my nightstand.</p> <p>The design allows for the cord to go to the left or the right. On my print, Apple's magnetic charger fits perfectly in place, which is then snug against the watch as it should be.</p> <h3>Print instructions</h3><h3>Category: Household Print Settings</h3> <p><strong>Printer Brand:</strong> Prusa<br/> <strong>Printer:</strong> I3 MK3S<br/> <strong>Rafts:</strong> Doesn't Matter<br/> <strong>Supports:</strong> No<br/> <strong>Resolution:</strong> 0.15mm<br/> <strong>Infill:</strong> 15%, 50%<br/> <strong>Filament:</strong> Prusament, Mika3D PLA Galaxy Black, Silver Silk</p> <p><strong>Notes:</strong><br/> Base is Galaxy Black. It prints flat on its bottom.<br/> Upright portion is Silver Silk, prints with its back against the build plate.</p> <p>No supports needed.</p> <p>I printed the base with an infill of 50% just to bring the weight up. ~30g. Gives a nice solid feel that won't topple over so much.</p> <h3> Post-Printing</h3> <p>I modeled in 2 small 2.9mm in diameter and 8mm deep holes for small cabinet screws to hold it together. Not strictly necessary though.</p>