Apple Watch Band Holder - Wall-Mount, High-Density

prusaprinters

<p>This Apple Watch band holder can mount on a wall or cabinet door using the convenient screw holes (perfectly optimized for a #6 wood screw), or your favourite mounting tape.</p><p>You can store multiple bands in each section; the convenient guide bumps keep everything neatly organized for when you show this off to your friends and family.</p><p>I've uploaded a few versions to make everyone feel special. The [A x B] file name format refers to the number of sections, and the number of bands per section. Each file is available to fit either 38/40/41 mm or 42/44/45 mm bands. A 6x3 45 mm is pictured in the cover photo. (<strong>Update: </strong>there is a new R3 version that fits both sizes.)</p><p>You may be wondering—why not design this with hidden screws? Two reasons: it's easier to print, and if you have so few bands that you can't cover the screw holes with one at all times, you probably don't need this product.</p><p>I have personally conducted several high velocity cabinet door opening tests, and not a single band has fallen off.</p><p>Bonus: the top of the holder is a great shelf where you can put things (unless you've mounted it inside a cabinet door; then they will go flying).</p><p>If you'd like a specific size that isn't here yet, please message me and I'll generate it for you. (The entire project is designed in OpenSCAD and fully parameterized.)</p><p><strong>Update 2022-03-28:</strong> This new version has a larger angle and higher bumps for optimal strap management. The R1 design provided great high velocity performance, but the R2 design provides optimal retention through the transonic range.</p><p><strong>Update 2022-06-01:</strong> There is a new R3 version which fits both sizes at the same time. It has identical exterior dimensions to the R2 45mm version.</p>