Apple Watch Band Carousel

thingiverse

This carousel caddy was designed specifically to store and organize my Apple Watch band collection, an improvement over my previous design in terms of both functionality and aesthetics. I created it using Tinkercad. With four different bands for my Apple Watch and more on the way, I needed a reliable solution to keep them tidy. The idea was inspired by my earlier "Apple Watch Band Caddy," but this version is more visually appealing and practical. Print Settings Printer: Flashforge Creator Pro Rafts: No Supports: No Resolution: .2mm Infill: 20% Notes: I printed this Thing in PLA on a FlashForge Creator Pro using Simplify 3D with the following settings: . resolution .2mm with .4 nozzle and extrusion width . bed temp 60C on blue painters tape, with glass print bed (your configuration may vary). . extruder temp 220C . top and bottom layers 3 each, perimeter shells 2 . infill pattern full honeycomb, external fill pattern rectilinear . print speed 80 mms . print time about 4 hours Post-Printing Assembly is straightforward. Attach the extender pillar to the base pillar. Attach the axel to the extender pillar. Slip the spinner onto the axel (threaded side). Screw the cap onto the top of the spinner (spinner should rotate freely when done). If there are any issues with the fit, sand if too tight. If the joins of the 2 pillars or the bottom of the axel are too loose they can be glued together. Do not glue the spinner or the cap to the axel as this could disable the carousel action of the spinner.