Apple style phone stand / phone holder

thingiverse

Apple style phone stand / holder with tilt regulation. To assemble this entire project, you'll require the following components: (1x) Foot (1x) Gripper (1x) Knob (2x) Cap You will also need: (1x) M6 x 40 screw (12 x 1 1/2 for those who prefer imperial measurements) (1x) M6 nut Printing the Project: The two major parts of this project are challenging to print. To ensure that the teeth are printed correctly, position them facing upwards and use support material extensively. This is the method I employed, and it resulted in acceptable print quality. However, I'm not convinced that this approach is ideal. It worked for me, but you may need to experiment with alternative methods. For instance, you might consider using support material to print the two caps and the knob as well. Assembling the Project: Refer to the attached image for assembly instructions. When inserting the caps, be prepared to exert a bit of pressure; if they're loose, you can also use glue to secure them in place.