Apple ][ Q-60B power supply holder

thingiverse

As I was dissatisfied with the design of [Asshen's bracket](https://www.thingiverse.com/thing:3356019) to fix a Q-60B power supply into an Apple ][, I decided to create my own system. It wasn't a remix since the only common point is the Q-60B power supply. For the power plug, I chose a product that also included a switch and a fuse. Unfortunately, this product's size was too big for the whole computer case, so I had to leave a small void between its support and the case. I reduced it in the published thing compared to the one I made for myself. This part can be printed without support with the rear face down, but it's better to fix it first into the case. To secure the power supply, I had to work around a pillar of the case. This compromised the design, so I added pillars on top to reinforce the link between the two orthogonal parts. Since the fixation to the case is weak, I added two more bolt places onto the long side, but you'll need to drill into your case to use them. Support is required for this part. **Caution: there's a space between the power plug support and the power supply that allows access to the power line terminal.** **Don't electrocute yourself!** A regret: the contact between the power supply case and the metallic part of the computer case isn't good, so adding a wire to ensure ground continuity should be a good idea. Shopping list: * [Q-60B power supply](https://fr.aliexpress.com/item/32866499727.html), * [Power socket with switch and fuse](https://fr.aliexpress.com/item/32959398453.html), * 8 × M3 nuts, * 8 × M3×8mm screw with cylindrical head, * 2 × M3×10mm screw with flat countersunk head.