Apple AirTag MOLLE and Universal 25mm Webbing Mount

prusaprinters

<p>This mount is designed for standard MOLLE webbing, laser-cut MOLLE , and standard 25mm webbing used on most backpacks. This includes non military packs!</p><p>Furthermore I used the official apple design guidelines to get the curvature of the AirTag just right.</p><p>This mount requires no tools to assemble.<br>To disassemble this mount, the cap has a small notch to use a screwdriver.</p><p>&nbsp;</p><p>Find more projects like this on my blog :)<br><a href="https://blog.hirnschall.net/">https://blog.hirnschall.net/</a></p><p>&nbsp;</p><p><strong>What and how to print:</strong></p><p>Do not reorient the parts. They are designed to print without support and are oriented for maximum strength. If you reorient them such that the layer-lines are normal to the prongs that interface with the webbing they might break off.</p><p>You need to print:</p><ul><li>1x airtag-molle.stl</li><li>1x cap.stl</li></ul><p>Use a UV-resistant filament.</p><p>&nbsp;</p><p><strong>The tolerances do not work on my printer:</strong></p><p>If the AirTag does not fit easily inside the airtag-molle.stl, use a negative value for the "XY Size Compensation" setting in the slicer for this part (e.g. -0.1mm). Move on to print the cap.</p><p>If the cap cannot be pressed into the airtag-molle.stl, use a negative "XY Size Compensation" value.&nbsp;</p><p>If the cap is too loose inside the airtag-molle.stl use a positve "XY Size Compensation" value.</p><p>&nbsp;</p>