Anycubic Wash Station Mars Adaptor - Taller/Non-Adjustable piece

thingiverse

I modified the original design by removing the vertical section, adjusting its length and adding a slot and peg that allows this component to slide onto the smaller, non-adjustable holder that comes with The Anycubic Wash and Cure Station. This enables you to attach the Elegoo Mars build plate to the smaller adapter and use the wash station for taller parts that occupy most of the build area. I included a smaller "fitment test" piece that can be printed quickly to ensure the slot is large enough for your adaptor and print. Depending on printer type and resin bleed, you may need to adjust the slot to fit your specific printer. Print this standing vertically on the unslotted end with no supports required. Please note there's a peg in the slotted area that fits into the gap in the stock adapter (see "cross-section view"). This was printed on the Standard Mard and tested with the Standard Mars build plate, but I'm unsure if it will work with the Mars Pro plate. Use the "Mars Fit Test" model to check before printing the entire piece to know for sure.