Anycubic Predator NX (Linear Rail Mod)

thingiverse

Anycubic Predator NX (Linear Rail modification) model ========================================== Description --------------- This is a full CAD design of my modified Anycubic Predator with linear rails. All essential measurements are accurate to within a reasonable level and have been sourced either from CAD drawings provided, or using vernier calipers. Components ----------------- The motion system's all parts are modeled, including the following: - Tower extrusions - MGN12H delta carriages can be downloaded from their own page here: https://www.thingiverse.com/thing:4349266 - Delta arms - Delta effector - Stepper motor assembly - Idler and tension assemblies Furthermore, I have implemented the essential delta kinematics within the Fusion 360 design. Each tower carriage can be moved, and the effector moves correctly in relation to the positions of the A, B, and C tower carriages. Software used ------------------- All design work, assembly, and rendering were performed in Fusion 360. File formats ---------------- The following file formats are being made available: - f3z - Fusion 360 archive containing the assembly and all parts as separate components. - step - Fusion 360 design containing all components within the master assembly. - stl - Printable components needed for the modification. Licensing ------------- This design is published under the Creative Commons Attribution license. You may use any of the data provided for any means, as long as attribution is given to myself and the people mentioned below. Changelog --------------- 22 May 2020: Initial release. Attributions / Credits --------------------------- The following is a full list of sources for various components used within this assembly: - Original Predator design by Anycubic - CAD drawings and measurements provided by Matt Sunley - Duet3D Smart Effector v2.0 by Duet3D - Volcano heater block by Nikolaj - E3D Threaded Heatsink 1,75mm with nut by Morten Nielsen - Nema 17 Stepper Motor 40mm by Ali Kosif - DIN EN ISO 7380-2 Button-Head Screw collection by Jakob - DIN EN ISO 4762 Hex Head Screw collection by Jakob - DIN EN ISO 10642 Countersunk Screw collection by Jakob - GT2-6mm Pulleys and Idlers by Sisul Galog - F695 Bearing by Elahd Bar-Shai - T-Slot / V-Slot Drop-In Nuts by Alan Weinstock Any components not attributed above are original work by myself.