Anycubic Photon Resin Wash Bracket Adapter

thingiverse

WIP - Not Yet Tested or Printed. Removing Resin Stains from Prints Can Be Frustrating, So This Component Aims to Make the Process Easier by Combining with a Tupperware Container Filled with Alcohol on a Magnetic Stirrer. The Tupperware Lid Will Need a Rectangular Cut and This Part Glued in Place to Create a Seating for the Print Bed, Allowing It to Rest at the Perfect Level Next to the Printed Part Submerged in Alcohol. Tools/Parts Required: * A Suitable-Sized Tupperware Container Large Enough for the Printed Part to Hang Down but Not So Large That You Need to Fill It with Excessive Alcohol. * This Printed Component (Made from a Material Resistant to Alcohol). * A Cutting Tool to Cut a Rectangle Matching the Lower Dimension of the Part, Knives Work, But a Dremel Offers Better Precision and Control. * Suitable Adhesive to Attach the Adapter to the Cut Tupperware Lid. * Magnetic Stirrer with Corresponding Metal "Spinner". * Alcohol or Other Suitable Solvent (Always Use It). Cleaning Method: 1. Drain Most of the Resin from the Part So It Doesn't Get Lost. 2. Ensure the Tupperware Has Its Lid On, Adapter Glued in Place and Dry/Cured, Filled with Alcohol to the Correct Level - Just Touching the Print Base for Full Submersion. 3. Drop the Magnetic Stirring Metal Capsule into the Alcohol (It May Already Be There). 4. Position the Tupperware on Top of the Magnetic Stirrer Machine. 5. Insert the Print Bed and Attached Resin Part into the Center of the Printed Adapter (Already Attached to the Tupperware Lid), Holding the Top to Prevent Anything from Falling Over. 6. Turn On the Magnetic Stirrer, Gradually Increasing Speed Until It Spins the Metal Capsule Inside, Stiring the Alcohol. 7. After a Few Minutes, the Part Will Be Cleaned; Gently Brush the Part Optionally. 8. Remove Supports and Dry Off the Resin Print as Desired. 9. Cure as Usual. Once I've Tested This Component and Printed It Successfully, I'll Post a More Detailed Guide with Clear Instructions (It's Simpler Than You Think).