Anycubic Photon Mono X VAT Lid - Slide-in version
thingiverse
I know there are several lid variants here on thingiverse, but all I've seen so far have to remove two bolts holding the VAT. My version just slides in place without need to unscrew it. It have two variants: left and right parts to glue together for printers with work area below 248mm and united full size version for printers able to print 250mm. I used PETG (glued with dichloromethane), I guess PLA will work fine too. But not sure about ABS - it tends do dissolve with resin. If you are not able to glue PETG for some reason - you can drill holes and use some bolts-nuts-rivets. Or you can use hot air gun to heat and weld parts together. Upd: As requested - added solid-bottom versions of lid cover.
With this file you will be able to print Anycubic Photon Mono X VAT Lid - Slide-in version with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Anycubic Photon Mono X VAT Lid - Slide-in version.