Anycubic Photon Mono Temperature Led Fume Extractor 3M filter

thingiverse

Thermal camera with hood 3M filter, with LED backlight and timer. For Phon mono 2K When turned on, the green backlight lights up and the platform heats up. After printing, the platform rises and at the top point includes a button that sends a signal to turn off the backlight and turns on the hood fan 5015, which blows out the smell through the 3M filter for about 60 seconds. I took the case from https://www.thingiverse.com/thing:4749818 Made many changes in it. The Anycubic logo and the logo act as air puffs during extraction. Green illumination does not crystallize the photopolymer. The temperature relay is configured for heating, heats the rack with a ceramic heater from the fdm 3d printer. Why do you need heating, you ask? When heated, the polymer is thinner and flows faster under the part. And the room is cool and the foam is stored in the dark and cool. You can buy https://cutt.us/bj8ev What is needed: Time relay NE555 12V, capacitor 50V 680μF (ECR681m50b) Thermorelay W1209 in the case Heating element cartridge 12V 40W Fan 5015 12V On/off button Power connector 2.5x5.5 Power supply unit 12V 3.3A - 4A RGB LED strip 5050 50 cm. Neodymium magnets 12 pieces 5x5 mm Bolts M3x12mm 4 pcs Nuts M3 4 pieces End button with a lever Tested for several years.