Anycubic Photon Filter Box and Back Plate

cults3d

Updated 9/6/2019 (See Below) I love the original, but went a different direction, so made some (very) simple mods: 1. The filter box is only 9mm thickness to accommodate thinner filters. I just cut them in Prusalicer, but they work. 2. The screw holes are centered and now 5mm diameter so that the bolts pass all the way through and bolt together. 3. I added a shim plate to keep the filter box from hitting the fan. 4. I removed the switch from the back plate. I went with an AC fan to keep it solder-free and decrease current draw on the power supply. 5. I added larger indents for the nuts onto the back plate. If you use the fan I spec'd below you'll need to cut the bolts flush on the back side. The AC fan is silent and awesome and can be found here: https://www.amazon.com/dp/B009OXTWZI/ref=cm_sw_em_r_mt_dp_U_igTBDbXSDNR94