
Anycubic Mono X Lid Spacer for Heater Wires - 4 Part
thingiverse
<b>Anycubic Mono X Lid Spacer for Heater Wires - 4 Part</b> This is a remix of my original design: Anycubic Mono X Lid Spacer for Heater Wires https://www.thingiverse.com/thing:5186359 <b><del>THIS IS UNTESTED!</b></del><b> 02/09/2022: This has been tested by user http://www.thingiverse.com/jgutz20/ and he confirmed the 4pc design does work!</b> I have a 400x400x500 FDM printer so I didn't need a 4pc design, however a lot of Anycubic Mono X users don't have another printer let alone one large enough for a single print so I decided to remix the spacer for resin printing. At the time of posting this I still haver ZERO confidence in my resin printing ability otherwise I would have tested this myself before posting it. <b>Please print the two test files first <del>and if it doesn't fit please comment here so I can make adjustments to the file. I'm flying somewhat blind here</del> This screws in using the 4 stock holes however the stock screws are too short once added so you'll replace them with four M4x15mm Hex screws. There are 6 files, 4 pieces for the spacer and two test pieces, all labeled. <b>Here are my other designs for the Anycubic Mono X 4K</b> ANYCUBIC Photon Mono X Clip On Heater Mount http://www.thingiverse.com/thing:5190198 ANYCUBIC Photon Mono X Z-Axis Bumper Guard http://www.thingiverse.com/thing:5185340 Anycubic Mono X Lid Spacer for Heater Wires http://www.thingiverse.com/thing:5186359 If you do end up using any of these, please take a picture and post a "make"
With this file you will be able to print Anycubic Mono X Lid Spacer for Heater Wires - 4 Part with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Anycubic Mono X Lid Spacer for Heater Wires - 4 Part.