Anycubic Mega Zero Rear Mount for Mean Well LRS-350 Power Supply

prusaprinters

This is a Remix of the "Power supply mod for the Ender 3" by Proper Printing. https://www.thingiverse.com/thing:3773553 This power supply mod locates the Mean Well LRS-350 Power Supply at the back of the printer keeping things neat and tidy. As the PSU is behind the printer, it means you can easily install a Dual Z-Lead Screw setup. Only the Left bracket has been modified to suit the different frame design of the Mega Zero v1.0, the Larger Right side bracket is the same. Installation: 2x M4 12mm Cap-head Bolts and washers to fix theback of the PSU to the Printed Mounts (don't use longer bolts or you could damage your power supply) 2x M4 8mm Cap-head Bolts and washers to fix theunder-side of the PSU to the Printed Mounts (don't use longer bolts or you could damage your power supply) 5x M4 8mm Cap-head Bolts and T-nuts to fix the Printed Mounts to the Printer Frame Proper Printing has some neat "side approach nuts" to mount the casing to the end of the aluminum profile, however, I see these as optional and not really required. https://www.thingiverse.com/thing:3773580. I recommend the following C14 IEC Socket with Switch and 250v Fuse due to its low profile: https://www.amazon.com/gp/product/B07RQV2NPN/ref=ppx\_yo\_dt\_b\_asin\_title\_o00\_s00?ie=UTF8&psc=1 Print Settings Printer: Anycubic Mega Zero Rafts: NoSupports: Yes Resolution: 0.2Infill: 35% Cubic Filament: X3D Pro PLA Black Notes: I recommend you use "Tree Supports" everywhere and Print both components on their side as shown, for maximum strength. I also printed at 210c as this helps make it stronger too. Category: 3D Printer Parts