Anycubic Mega Zero - Fan & Blower holder

thingiverse

Hi, So this is my take on a Fan & Blower holder for the Anycubic Mega Zero 1.0. It is (heavily) based on this design: https://www.thingiverse.com/thing:4588250, but I do not like how high and large the construction is. There are also some holes in the airducts that leak air, so I decided to redesign it and (hopefully) improve the airflow and size. The outlets are also pointed downwards towards the print and not the nozzle so the printed part is cooled better. It uses the stock Fan and Blower, but the fan to cool the heater block can also be replaced by a 4020 version. There are no additional screws or other parts needed and the blower sits firmly on top without the need for screws. A nice surprise was that the fan is much quieter now. I think the original cover worked as a sound box that increased the fan sound. In my design there is no cover (so watch your fingers) and there is no echoing or sound box like effects. Please note that I do not have a silicone sock around my nozzle so it might not fit properly if you have one. DISCLAIMER =p This is still the first version I designed and printed, and it worked okay for me, but I am open to improvements that you might see fit. So let me know your feedback ! === **Update 11-07-2021 (Added Fan & Blower holder_Rev03.STL and removed Rev02 versions): There were some major design flaws in the mounting and the outlets that resulted in bad cooling of the printer part and that I have hopefully corrected in this version. Please try and let me know your feedback. Thanks** Update 17-04-2021 (Fan & Blower holder with BLTouch mount-Rev01.STL): Added a simple BLTouch mount and repositioned/ corrected a mounting hole. Update 03-01-2020 (Rev02): Increased mounting hole size to 2.75mm. Increased size of fan mount area and added draft. The fan should fit easier now. And also increased slot on third leg so it should fit better. === **We are working on an updated design that can be printed without supports as requested by @youcouchnah. Follow the progress on https://www.thingiverse.com/groups/anycubic-mega-zero/forums/general/topic:48431**