Anycubic Mega Zero - 10mm-Gantry adapter for Hero Me Gen5

thingiverse

**This design is superseded by https://www.thingiverse.com/thing:4734247. Please use that design first.** These are adjusted Gantry adapters for the Hero Me Gen 5 (https://www.thingiverse.com/thing:4460970) that makes it fit onto the Anycubic Mega Zero (1.0 & 2.0). MZ-Gantry-adapter_1A-alternative1.STL is for the stock hotend. MZ-Gantry-adapter_1B-alternative1.STL is for an E3D V6 version hotend. Please note that this will move the hotend 10mm forwards as this offset was needed to bypass the X endswitch that is on the X-plate on the Mega Zero. The version that does not move the hotend forwards can be found here: https://www.thingiverse.com/thing:4743749 Thanks ! == Update 26-01-2021: Reduced the height of the Clip because the MZ X plate is thinner than expected (2,75mm). == Update 24-01-2021: Corrected the position of the mounting holes. == Update 23-01-2021: Added a thinner Gantry clip because the MZ has a thinner plate than the E3. == Update 23-01-2021: In the photos you'll see an old version in which the hotend is mounted to the part with bolts and nuts, but I have elongated the mounting block so you just need longer screws to be able to mount the hotend to the X-plate.