
Anycubic Kobra SD Card adapter(regular Size)
cults3d
Using Micro SD Cards with the AnyCubic Kobra is very difficult to me because of the small size, so I designed an Adapter to use regular Sized SD Cards with Anycubic Kobra. Additionally there are two additional slots to store more SD Cards. You need: One printer part One SD to Micro SD Card adapter like this one: https://www.ebay.de/itm/174948853394 How to install: Carefully remove the Plastic Cover from the SD to Micro SD Adapter and insert it into the printed part with the PCB flat side in back position. Then carefully make 2 45 Degree Bents of the Ribbon cable and finally store the excessive cable into the Cable Compartment of the printed part. Finally remove the 2 Screws below the LCD Display and use the screws to mount the SD Card Adapter in addition to the Display . (Don't forget to plug in the Micro SD Card adapter and make sure to get the "click") With the SD Adapter in Place, Anycubic will not recognize Insert and Eject of the SD Card because of the missing Card detect Signal. Only way to see new files is to reboot the printer. The Better option is to use the "Refresh button" in the Print Menu, but it does not work correctly, so I had to fix it (Anycubic support still claims its 100% working) You can get the fixed Refresh button by updating with the attached firmware. If you feel not happy anytime with the updated firmware, you can easily revert to the original one using the firmware from Anycubic. (https://www.anycubic.com/blogs/news/all-you-need-to-know-about-kobra-series) I will NOT take any responsibility for any damage which results in using the provided Firmware! You can perform the Firmware update as easy as putting firmware.bin onto a Micro SD Card and power up the printer while inserted. Only issue is that the printer loses the calibration with each Firmware update, so you need to redo it after the update That's it! PS. The Firmware is based on the great work of Jojos Kobra improved Firmware, which disables the disturbing Turn-On-Sound among other great features. Thanks Jojo! Find it at:https://github.com/jojos38/anycubic-kobra-improved-firmware Thanks, Jojo!
With this file you will be able to print Anycubic Kobra SD Card adapter(regular Size) with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Anycubic Kobra SD Card adapter(regular Size).