Anycubic Kobra Filament Guide

prusaprinters

<p>This is a filament guide for the <a href="https://www.amazon.com/ANYCUBIC-Photocuring-Monochrome-Off-line-Printing/dp/B08Q394GQ1?dchild=1&amp;keywords=photon&amp;qid=1617126624&amp;sr=8-3&amp;linkCode=ll1&amp;tag=thingiverse09-20&amp;linkId=bf56b1e55751634fd84c577f300c3e86&amp;language=en_US&amp;ref_=as_li_ss_tl">Anycubic</a> Kobra (not Kobra Max).</p><p>I'm pretty sure this won't help or hurt your prints, its more of an organizational thing. When I started using a bearing aided filament spool holder, the filament would come out in an "s" pattern (see pic) so I made a guide to make sure it stayed tidy and went as close to straight down into the extruder as possible.</p><p>If you choose to print it, do it in the orientation that is being uploaded with tree supports as that will give you the best outcome.</p><p>When mounting on the machine, just stretch it a little and push down, making sure the bottom piece clips underneath, sometimes it takes a little wiggling.</p><p>*I updated it to increase the internal height to make it easier to clip underneath, I'll put both files up so you can choose. I find the original tighter one prints better with PLA whereas the newer looser one prints better with PETG due to material shrinkage.</p><p>*Both files were updated to account for variances when printing. The tighter one was made 0.25mm looser and the looser one was made 0.25mm tighter.</p>