Anycubic Kobra Extra Spool Holder

thingiverse

This is to hold a 2nd spool of filament on top of the Anycubic Kobra. It's very sturdy, and has to be.Holds at least 1kg (2.2 Lbs) and could hold more. It takes about 3 hrs to print and uses 115 grams of filament, about 38 meters. This Mounts on top of the existing Spool Holder Foot mount, and requires 2 M4 screws that are 10mm long. Installation: Take off any spool you have on the original holder Unscrew both M4 screws in the original holder foot and set screws aside Put 2 M4 x 10mm screws into the newly printed Filament holder foot. Place the New foot on top of the old foot and line up screw holes. Hold the 2 pcs together with left hand and place the whole assembly onto the top of the Kobra gantry with screws lined up with threaded holes. Hold down with left hand and turn screws in with right hand until snug. I printed mine with these settings: Layer Hight: 0.3mm Nozzle size: 0.4mm Material: Ziro Black PLA Hot end Temp: 213c for all layers Bed Temp: 65 for all layers Supports: Yes, just for the end of the Spool Tube rim Infill: 15% Rectilinear Walls: 3 top, 3 bottom, 3 vertical mounting Hole size: 4mm+ mounting Hole distance: 30mm apart Spool Holder Tube: small Diameter= 32mm Large end diameter = 45mm Spool Holder Tube length inside to inside of chamfer edge = 66mm Total Tube length outside to outside = 75mm 45 degree arm length = 230mm Distance from Spool Center to Spool center = 270mm Programs: Fusion 360, Prusa Slicer Machine: Anycubic Kobra