Anycubic i3 Mega S top bracket for TUSH
prusaprinters
<p>This model is remixed from:</p><p><a href="https://www.thingiverse.com/thing:2917729">https://www.thingiverse.com/thing:2917729</a></p><p> </p><p>The TUSH spool holder is here:</p><p><a href="https://www.thingiverse.com/thing:2047554">https://www.thingiverse.com/thing:2047554</a></p><p> </p><p>I found out the hard way that it barely didn't work on my printer, and decided to at least put the wasted filament to use to figure out how the model would need to be changed. It's not a perfect edit, but it works well.</p><p> </p><p>I printed these in Cura v4.11.0 with a .2mm layer height and no supports. Ironing (the setting, not the clothes cleaning process) really makes them a lot smoother and nicer-looking. Important note: the bracket should be printed four times: two as it is, and two mirrored for the other side of the holder.</p>
With this file you will be able to print Anycubic i3 Mega S top bracket for TUSH with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Anycubic i3 Mega S top bracket for TUSH.