Anycubic i3 Mega-S Magnethalter für Touchscreen

thingiverse

I designed this magnet holder for the Raspberry Pi 3/4 touchscreen from "Phillip's 3D Print Shop" because I wanted to place the touchscreen without drilling anywhere on the frame. This is secured with a Neodym magnet glued into the holder and another Neodym magnet at the desired location on the frame. A magnetic element with a maximum diameter of 30mm can be glued into the hollow space. I chose the depth of the hollow space so that it holds two magnets side by side. The holder therefore closes seamlessly on the frame and can be easily rotated 360 degrees. The Neodym magnets I used have dimensions of 30mm x 3mm. This allows the holder to hold firmly onto the frame while still being able to rotate lightly in any desired direction. To secure the Raspberry Pi 3/4 touchscreen holder to this magnet holder, a DIN 912 cylindrical screw in size M5x30 and a high-form DIN 1587 nut in size M5 are needed. For example, you can find these on eBay at: "DIN 912 Cylindrical Screws" https://www.ebay.de/itm/DIN-912-Cylindrical-Screws-Stainless-Steel-VA-ISK-Zylinder-Kopf-M3-M4-M5-M6-M8-M10-M12-M16/271853628042?_trkparms=ispr%3D1 "High-form DIN 1587 Nuts" https://www.ebay.de/itm/High-form-DIN-1587-Nuts-Stainless-Steel-A2-A4-V2A-V4A-Nuts-M3-M24/273212307280?hash=item3f9cb8f750:m:mtWtn9H2SQvi5LWJHwZc0zA