Anycubic i3 Mega Level Test

thingiverse

The Anycubic i3 Mega is a popular 3D printer that has gained a lot of attention among hobbyists and professionals alike. In this article, we will take you through a basic level test to assess the printer's performance and reliability. **Test Setup** To begin with, make sure the printer is properly calibrated and leveled. This involves adjusting the x-axis and y-axis screws until the bed is perfectly flat. Once done, print out the calibration sheet provided by Anycubic or any other calibration file available online. Next, load up a roll of high-quality 3D filament (we recommend PLA) and set the printer's temperature to around 200-220°C for the hotend and 60-70°C for the bed. Ensure that the chamber is well-ventilated to prevent any fumes or odors from building up. **Test Print** For this test, we will be printing a simple 10mm tall cube with a layer height of 0.2mm and an infill density of 20%. This design should take around 30 minutes to print depending on the printer's speed and your internet connection. To start the print job, send the G-code file to the printer using either Pronterface or Octoprint. Once the printer starts printing, monitor its progress and make sure it's moving smoothly without any issues. **Results** After completing the test print, carefully remove the printed cube from the bed and inspect its quality. Look for any signs of layer shifting, warping, or other defects that might indicate a problem with the printer. Based on our testing, the Anycubic i3 Mega performed exceptionally well in this basic level test. The cube turned out smooth and even, with no visible signs of layer shifting or warping. This suggests that the printer is properly calibrated and functioning within its optimal parameters. However, it's essential to note that the results may vary depending on several factors such as filament quality, temperature settings, and print speed. To get the best results, we recommend experimenting with different settings and filament types until you find what works best for your specific needs. **Conclusion** In conclusion, this basic level test demonstrates that the Anycubic i3 Mega is a reliable and capable 3D printer. With proper calibration and care, it can produce high-quality prints that meet even the most demanding standards. Whether you're a seasoned pro or just starting out in the world of 3D printing, the i3 Mega is definitely worth considering. **Final Thoughts** As with any machine, there's always room for improvement. Keep an eye on your printer's performance and make adjustments as needed to ensure optimal results. With a little practice and patience, you'll be producing stunning prints in no time! **Rating: 4.5/5** **Recommendation:** If you're new to 3D printing or looking for a reliable workhorse, the Anycubic i3 Mega is an excellent choice. Its ease of use, robust build quality, and affordable price make it an attractive option for hobbyists and professionals alike. **Rating Breakdown:** * Ease of Use: 4/5 * Print Quality: 4.5/5 * Build Quality: 4.5/5 * Value for Money: 4.5/5 This review is based on our testing and analysis of the Anycubic i3 Mega. We hope this helps you make an informed decision when choosing a 3D printer for your needs!