Anycubic I3 Mega Hemera (Hermes) Mount Full Voume

thingiverse

It appears that this is a guide for setting up and configuring a 3D printer, specifically an Anycubic i3 Mega with a SKR 1.4 Turbo board and TMC 2209 stepper drivers. The guide covers a range of topics, including: 1. **Mesh bed leveling**: This involves using a probe to measure the distance between the nozzle and the bed at multiple points, creating a mesh of data that can be used to adjust the bed height. 2. **Calibration**: The guide provides instructions for calibrating the printer's e-steps (the number of steps per millimeter) and flow rate (the amount of filament extruded per minute). 3. **Firmware configuration**: The guide covers how to configure the firmware (the software that runs on the printer's board) to use bilinear auto bed leveling and BL Touch (a probe sensor). 4. **Cura configuration**: Cura is a popular 3D printing slicer software. The guide provides instructions for configuring Cura to work with the printer, including updating machine profiles and adjusting retraction settings. 5. **G-code**: G-code is a programming language used by 3D printers to execute commands. The guide provides sample G-code scripts that can be used to perform various tasks, such as homing the axes, leveling the bed, and printing a calibration cube. Some notable points from the guide include: * The printer has a 220 x 220mm bed size. * The SKR 1.4 Turbo board is used with TMC 2209 stepper drivers. * The micro switches are still used for limits. * A filament runout sensor is not currently attached, but plans to install one in the future. If you're looking to set up a similar printer configuration, this guide should provide a good starting point. However, keep in mind that it's always a good idea to research and understand the specific requirements of your printer before attempting any modifications or configurations.