Anycubic I3 Mega Direct Drive V2

cults3d

Getting rid of the Bowden tube and turn your machine into a direct drive system. You will need two M3 x 12mm, to replace the two on the front of the hot end, and two M4 x 10mm screws and nuts to mount the motor. The mount from the motor is the original that Anycubic used, and you will need a stepper motor extension cable to attach it. Remove the PC4-M10 in top of the hot end, and use a PC4-M6 in the extruder side. Insert the PTFE tube and cut just so the extruder sits snug, and screw down.