Anycubic I3 Direct Drive V2
thingiverse
This is my update version of this one: https://www.thingiverse.com/thing:3696097 With new duct and new adjustable belt/tensioner You will need: 3 IGUS RJ4JP-01-08 3x 40mm M3 screw for the motor/extruder 2x M3 bolt and screw for the belt holder 1x M3 bolt and screw for the fan, I cut 1.5mm of the fan bracket to make place for the bolt (between the fan and extruder) 1x M3 bolt and screw for the belt tensioner You will need to adjust the Z height by 7mm because the top motor screw was in the middle of the rod, so I put the carriage higher to keep the screw accessible. The belt/tensioner will not fit the carriage V1. Print the carriage on the side. Put a LIKE and comment if you print and try.
With this file you will be able to print Anycubic I3 Direct Drive V2 with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Anycubic I3 Direct Drive V2.