Anycubic Chiron Z Axis Front Reinforcement 3/8" rod

thingiverse

I used 3/8" x 36" rods since Lowe's had them on hand and I couldn't find 10mm locally. The top brace is designed to be rigid with better support, not just from the screws but also from a notch as the rod has tension, taking some stress off the bolts. In your slicer settings, check that the scale is set at 2540% for all parts. Parts are printed in the flat orientation facing down. When printing the bottom brace, make sure the curve part of the hole, or "screen holder," is in the upright position. I used PETG with 40% infill; no supports were needed. I've added two styles for the bottom support - the only difference being one for the screen holder. You can use the screen holder or attach it to the extrusion on the side. Parts required: 2Pc - Rods 3/8" x 36" 8pc Flat head 3/8" bolts 8pc Lock Washers 3/8" 4pc - M5 x 50mm screws 8 pc T Slot Nuts, M4 8 pc Socket Cap Screws M4-.7 X 15MM Here is the Spool Holder link: https://www.thingiverse.com/thing:4325014 Enjoy!