Anvil Pull Ball Chain, Keychain Knob | Handle | Fob | Finials

thingiverse

This Ceiling Fan / Light pull chain, ball chain, pull string knob, handle, finial, fob is made for use with standard #6 (3.2mm) ball chain and it will also work fine with smaller chain as long as you attach a #6 metal connector to it. THIS VERSION NEEDS TO BE ORIENTED UPSIDE DOWN AS IT REQUIRES NOMINAL SUPPORTS. To set up, simply feed the chain through the top of the print and connect a standard #6 connector to it. If using a ball chain and metal connector, form a loop around a keyring and hook with the other end of the connector. If you don't have a metal connector, you can print the BALL-CONNECTOR.stl file I've included. Note that if you print the connector in PLA, it will be a tight fit. Lay the chain on a hard surface, position the connector over the last ball of the chain and push down until it snaps into place. You may also use string with a large knot tied in the end. When printing this item, I usually use 10% infill - however, if you plan to hang it from a ceiling fan, you might want to use a higher infill for more weight. I have created hundreds of remixes. If you want to search by type, visit my profile: https://www.thingiverse.com/ToaKamate/about