ANUBIS Powered Micro Modular Synthesizer Case by Holmes Modular

thingiverse

ANUBUS! A new bused modular synth case. =P VIDEO: https://youtu.be/J7gtJwDYtJE Mini studio case with Egyptian theme and integrated bus boards with PTC fuses. WARNING! Make sure you use PLA+ for printing these. Something that holds together better than PLA. This is a long print, you don't want to waste your time with a cracking case. use PLA+! you have been warned. print at 210c nozzle 60c bed 60mm/s. Bus board files to send to JLC are here: https://github.com/caseyjholmes/Mr_Bus_Board For power you can use Meanwell RT-65-B or similar. All M3 hardware for modules and attaching rack sides/ears. You may want to attach the ears with threadlock nuts on the M3 screws. Use washers as well for more support. You may wish to ream the module holes with an M3 tap to clean them out after printing. Do so slowly by hand. Do not use a drill. You'll melt plastic. Join our facebook Eurorack 3D printing group for more like this!! https://www.facebook.com/groups/968686971141532/ fusion files included if you want to modify yourself. STEP files included and STL files etc. If you print onem please post a make! Check my other eurorack files. I have some more cases if you are crafty and skilled enough to get shallower! Enjoy! -Casey